Copper Range Hood Montana

Copper Range Hood Montana-What else could we call this magnificent wall range hood. Original in it’s design with bold blacken steel bar hammered along the crown with the amazing accents of  squared copper rivets and the copper rings and rivets enhancing the base. The body of this copper range hood Montana is hand hammered and fired to an antique copper. Creating the contrast of the boldness of the darken steel and the warmth of the hammered copper.

All of our copper and zinc hoods include a venting system, contact us for information on these vent systems. We will provide you with  a system that will work for your needs.

Mountain Copper Creations are all American  made in Montana  USA. Like us on face book

Copper Range Hood Montana crown

Copper Range Hood Montana crown

Copper Range Hood Montana

Copper Range Hood Montana Base

Copper-Hood-Needle-Hammered

Copper Hood Needle Inlay: This great copper hood is based off the design of our Suzan  wall mount copper range hood, the newer version has the same heavy hammered body and needle hammered inlay on the base. The stack has be lengthened and incorporates the needle hammering as well as the heavy hammered body. A needle hammered crown has been added to top it off.  The Copper Hood Needle Inlay has the same quiet elegance as the Suzan. Small changes in design create a wonderful new  appearance. Custom crafted using 51 oz copper material and welded construction. Warm your home with functional copper artistry by Mountain Copper Creations.

For more information on this or any of or copper work contact us

Needle-Inlay-Base

Needle-Inlay-Base

Copper Hood Needle Inlay crown

Copper Hood Needle Inlay crown

Custom Copper Hood Branded

Branded Copper Range Hood: This copper range hood is in the design of the Mount Jumbo the forest fire burnt front panel is reverse hand hammered the body of the Branded Copper Range Hood is hand hammered and fired to a medium antique copper with copper rivets. The bottom of the hood is arched, with two copper rings attached.  Our client made this hood their own by adding their brand to the front panel.  Each copper piece that Jim designs is crafted individually keeping in mind the desires of our clients.  If you have a brand you would like to incorporate into your home by adding it to a custom functional copper piece. Contact us to create for you!

Custom Copper Hood Branded

Custom Copper Hood Branded

Check out our cleaning instructions 

See more about us

Wise River Copper Range Hood

Wise River Copper Range Hood-This range hood is based on the design of our Ovando Copper Range 2 Hood  the same sleek design,crafted with 51 oz copper material and fired to a rich antique copper.  The Wise River Copper Range Hood is a larger hood with a deeper crown accommodating a sloped ceiling. The rivets on this hood are a bit larger due to the size of the hood. The body of the hood is hand hammered while the inlay in the base and crown are needle hammered.  The venting system we prefer for our range hoods is the vent a hood liner. This liner is great for the easy cleaning, quiet operation, and includes lighting. This and it is produced in the USA.

Check out all of our wall mount range hoods

Cleaning information

Wise River Copper Range Hood Crown

Wise River Copper Range Hood Crown

Wise River Copper Range Hood base

Wise River Copper Range Hood base

Copper wall hood Ovando 2
Copper wall hood Ovando 2

Copper wall hood Ovando

Copper Wall Hood Ovando 2 is an enhanced version of the Copper Wall Hood Ovando the crown has been changed to accommodate a sloped ceiling in the Ovando 2 and copper rivets have been added to the needle inlay at the base and crown of the hood.  So keep it clean or add embellishments, both hoods will add rustic warmth and charm to any home or cabin. Crafted using 51 oz copper material and welded construction complete with venting system. Proudly created in Montana U.S.A.

Contact us to quote your custom Copper Wall Hood.

See more Copper Wall Hoods

Ovando Range Hood

Like us on Face Book

Zinc Range Hood

This Zinc Range Hood  the Sun River is shown in the raw hammered zinc. The same quality construction goes into the creating of Mountain Copper Creations zinc products as we provide in our copper artistry. Zinc is gaining popularity in the home as well as the exterior of homes and businesses. Zinc has an  antimicrobial property, that makes it perfect for the kitchen and bath.

Check out the blacken version of the Sun River Zinc Range  hood

copper range hood pioneer mountain
copper range hood pioneer mountain

copper range hood pioneer mountain

Copper Range Hood-Pioneer Mountain: is a built to order,custom copper hood. Hand crafted to the specifications of the owners of this beautiful home. Also you will notice how this copper hood marries to the upper cabinets and extends to the ceiling above.   This installed version shows the warmth and function that copper artistry brings to any home. So  if  you are looking to add a dramatic statement to your kitchen or home consider copper or zinc  functional artwork . Crafted using 51 oz copper material and welded construction this copper piece will enhance this home and yours for many  years to come.

To view more detail for this great Copper Hood  See more details

Proudly Montana Made in the  USA Hand crafted by a local Montana craftsman

copper-range-hood-Mount-Jumbo
Copper Range Hood Mount Jumbo

Copper Range Hood
Mount Jumbo

Copper Range Hood Mount Jumbo:

This hood was designed with me in mind! Some girls like diamonds others, like me, are thrilled to have copper art, a handcrafted copper range hood. Named after the Mountain we live on Mount Jumbo. Jim created this piece by reversing the  hammering on the front panel which is fired to a forest fire burnt. The outer sides and arched front  are crafted by hand hammering and the color is fired to an antique copper. The framing around the front panel is also antique copper with copper rivets.  Two decorative rings add the final touch. You will notice the side panels are are slightly longer and arched to the front. This is created to fit the space we had available. If you have a unusual space or need a special application in your copper hood design we build to order, so no worries Jim will create for you.

Order # 0079

Custom Copper Range Hood the New York-er

Copper Range Hood: Working together with Elizabeth, Jim designed the New York-er. Elizabeth is a designer with the JMB Design Group in Huntington New York. So the name New York-er is perfect for this wall mount copper range hood. Measuring  78″ X 34″ this is a massive custom range hood.The hood body is hand hammered copper,that has been fired to an antique copper. The result sets the background for the dark fired copper strapping. The small needle hammered on the copper strapping is a perfect contrast to the larger hand hammering on the copper hood body. The strapping is created using  51 oz copper material that has custom beveled edges. Copper rivets fired to an antique copper color compliments the design. Copper artistry brings function and elegance to this copper piece. Hand crafted in the USA by a local Montana artist.

Custom Copper Range Hood New Yorker

Custom Copper  Hood  New York-er

 

Copper Range Hood and Copper Sink

Miller Creek Copper Range Hood : was named after the beautiful area close to Missoula, Montana where our clients reside. Jim created the design of this copper range hood by working closely with the owners, they were looking for an update in their kitchen. Wanting to replace their brick hood with a rustic copper range hood, they also needed an upgraded  sink. So of course they went with a custom farm front copper  sink and a copper range  hood. They chose a surface mount double basin farm sink to pair with this beautiful handcrafted copper range hood built to order. Hand hammered copper bar and rivets bring out the rustic appeal to this hand crafted  copper artwork. The bottom inlay is needle hammered on all five panels. If you are looking for a classic design take away the copper bar and rivets and let the hand hammered copper speak for itself. Remodeling or under new construction functional copper artistry will add warmth an beauty to your home!

This custom copper range hood the Miller Creek was so fun to create with our clients that I just had to show the finished kitchen.  This kitchen was a remodel and the end result is amazing.  They kept the existing counter-tops and cabinets. From there they add a Mountain Copper Creations farm front double basin surface copper sink and the copper range hood, added some back splash and the kitchen was new again. New build or remodel Mountain Copper Creations is able to handcraft your custom copper art.

Miller Creek Range Hood-no bar or rivets

Miller Creek Range Hood-no bar or rivets

Miller Creek Copper Range Hood

Miller Creek Copper Range Hood                                                                           

Order# 1028 with bar and rivets                                              Order # 1028 -N  no bar or rivets

 

 

Rustic Copper Range Hood Pioneer Mountain

The Pioneer Mountain Rustic Copper Range hood is named after a Mountain in Montana. As rustic as it’s name the Pioneer boast of beauty, it’s large mass consisting of hand hammered copper body with inverted middle slope design and barrel curved bottom.The center section is created with a ledge above the riveted middle bands. The heavy  copper bands are embellished with large hammered rivets. Fired to an antique copper. Attention to detail and design sets Mountain Copper ahead of the rest!  This incredible hood along with all of our copper work is created by a local Montana artist and proudly crafted in the USA

Rustic Copper Range Hood " Pioneer Mountain"

Rustic Copper Range Hood ” Pioneer Mountain”

Custom crafted  order # 0075

See all copper hoods

Let us create for you. Contact us

Cleaning Instructions

Check out the installed version

 

 

 

Custom Copper Range Hood Ultima Thule

This custom copper range hood the Ultima Thule  was designed for our client located in Alaska and named after their Lodge Ultima Thule. This rustic copper range hood is created using large hammer strokes on the hood body  which is fired to a burnt forest fire. Contrasting antique fired is used on the bottom of the hood,for the final touch this hood is edged in hand hammered copper bar and rivets. The trick to this handcrafted copper range hood was that it needed to get to the remote location of our clients, the Wrangell St Elias National Park is their home. Only accessible by plane.

This large hood  dimensions: Total length 75″ – Width Bottom 35″ Top 23″  Total height 28″

Contact us to create a hood designed for your space.

See all Copper Range Hoods

As always Proudly Made in Montana USA

 

Hand Made Copper range hood Gallatin

Hand Made Copper range hood Gallatin: This hood  is designed with beveled copper strapping and hand hammered copper rivets. The body of the copper hood is hand hammered and fired to an antique copper. Notice the copper dog bone corners on the base and crown of this copper hood. Another example of the attention to detail.  Hand made copper by local Montana copper smith Jim Clapham. Attention to detail along with quality craftsmanship and material sets Mountain Copper Creations above the rest. When you have Jim create a copper or zinc piece your will be involved in the entire process from the creation of the design to the end result of a magnificent custom piece for your home. Let us create a custom copper hood for you!

Dimensions as shown: height-36″  —-Base length  36″  Base width 24″—Crown length 18″ width 15″—–   order # 0074

Hand Made Copper range hood Gallatin

Custom Copper Hood Crown detailed in copper rivets and hand hammered strapping.

 

Contact us           See all copper hoods

 

Hand Crafted Copper Range Hood Trout Meadows with Square Copper Crown
Hand crafted Copper Range

Hand crafted Copper Range

The Trout Meadows Copper Range Hood is a classy rustic copper hood. Created with heavy 51 oz copper material and welded construction by Jim Clapham a local copper smith. This hood has needle hammered inlay on the hood bottom and the copper crown.The Trout Meadows Copper Range Hood adds simple copper charm to any home. The crown on this hood is custom created to nestle against the slope of the ceiling . Mountain Copper Creations will make your custom copper dreams come true! Proudly handcrafted in Montana U.S.A.

Order #0053 —custom order–  designate crown choice

See more Range hoods

Contact us

As alway proudly made in Montana USA

Copper Range Hood Simple Elegance  (Ovando)was designed for a small cabin next to a gorgeous river front view. Simple elegant design . Copper smithing at it’s best. Hand hammered with needle hammered inlay on the bottom,topped with a crown. Perfect combination of style and craftsmanship.

Full kitchen view, counter top created in brushed hand hammered antique copper inlay with hand hammered antique copper boarder.

Montana Made Artisty

Let us create a for you!

Custom order #0071

Contact us

See more range hoods

Zinc Range Hood Chicago

Zinc Range Hood Chicago: This hand crafted zinc range hood  is as elegant as it is functional. Created with quality zinc material and welded construction. Hand crafted to the design of our client from Chicago. This hood was designed with the flow of the room in mind. The glass inserts framed in zinc at the base if the hood, allows the light from the windows to flood the room. Darkened zinc is enhanced by the bold square crown which  adds to the massive look of this hood. Zinc is becoming a new medium for our designers and clients. With many of the characteristics of copper allowing for a stronger contemporary or industrial feel. Replacing stainless steel in many applications. We are proud of the craftsmanship Jim provides in his zinc pieces and hope you will enjoy them too!

Order # 0102

Contact us

zinc range hood

zinc range hood

Zinc Range Hood Sun River :

Zinc is becoming more and more popular for many applications, zinc counter tops, zinc sinks and zinc range hoods. The Sun River Zinc Range hood is made with the same quality and craftsman ship that is used for  all of our Copper Range hoods.  A Montana craftsman  creates this zinc range hood by hand hammering along with welded construction. While he uses a heat treatment on our copper to achieve the rich copper tones. A chemical patina has been used  in order to get the darker finish on this hood. Along with a liquid carnuaba car wax that has also been  applied prior to shipping.  If your looking for a new look. Maybe something with a warmer look than stainless steel. You may want to consider zinc. For your next  new home or remodel.

Order # 0101

Contact us to buy this product or get more information.

Make sure and check us out on Facebook

 

Hand Hammered Copper Range Hood

Hand Hammered Copper Range Hood Same design as the Louise:  Add a  crown on top, embellish with a hand hammered copper pot rack  added to the bottom. Same basic design two great looks! Looking for a way to enhance the beauty of your home ! Try functional copper artistry created by a Montana copper smith. All of Mountain Copper Creations are created using 51 oz copper material that has been specially milled for us. This makes sure that the copper you receive meets our high quality guidelines. Let us create a masterpiece for you home in copper or zinc!

check out the original Louise  

Order # 0058 with crown and pot rack

See more copper range hoods.

Contact us to place your order

Custom Copper Fly Rod and Reel

Custom Copper Fly Rod and Reel:  Our client is an avid  fisherman who enjoys the rivers edge. He wanted to incorporate his love of Fly Fishing into his home. So knowing this, Jim created  a Copper Fly Rod with Copper Reel. He added a hand made Tied Copper Fly with Copper Fishing line, all created with  hand crafted copper. This is an actual scaled down copper version of an antique bamboo pole and reel. Once assemble the whole rod, reel,line and fly rested into the  needle hammered inlay at the base of the copper range hood Louise. The body of the hood has needle hammered inlay with ribs. All fired to an antique copper. This hood is magnificent in design and function.  Do you have a passion that you want to incorporate into a functional copper piece? Contact us to make this happen for you!

order # 0069

Custom Copper Fly Rod and Reel

Custom Copper Fly Rod and Reel

Contact us          See more Range Hoods

Rustic Copper Range Hood-Whitney

Rustic Copper Range Hood-Whitney with it’s classy lines and hand  hammered  copper bar trimmed in rivets, stays true to the design of  this rustic log home and wonderful forested surroundings.  Hand crafted using 51 oz copper material and copper welded construction this rustic range hood is beautiful and functional.

Order # 0065

See more range hoods

Contact us

Brady Copper Hood

Brady Copper Hood a hand crafted fire place hood -classic sleek lines with needle hammered inlay,with a copper crown to top it off. The warmth of copper is reflected in the glow of the fire below.Add the glow of copper to your home with a hand hammered copper hood. Use for a fireplace or as a copper range hood. Rustic Copper created for your home.  Proudly crafted in Montana U.S.A

Order #0064

See all Copper Range Hoods

Contact us to design for you

Copper Range Hood " The Thompson Falls"

Copper Range Hood “Thompson Falls”: Need  great look for a smaller area The”Thompson Falls” may be just what you are looking for. With ribbed design and hand hammered copper decorative rings, topped off  with a crown. This range hood will defiantly make a WOW statement in any country kitchen! Crafted using 51 oz copper material and welded construction and fired to a spicy  antique copper. Created   by a local copper smith Jim Clapham. Add warmth to you home with a functional hand  hammered Copper Range Hood by Mountain Copper Creations. Proudly crafted in USA.

All of our copper range hoods can be crafted using zinc!

Order # 0063 Check out more range hoods

Custom Copper Range Hood “Wonderland” Jim and I had a great time meeting and working with our clients on this  custom copper range hood “Wonderland” . This design was created by Jim for our clients to continue the whimsical design of their home. Handcrafted copper: The bell shape is hand hammered, in a forest fire burnt and the arched base is smooth with a light fire. 51 oz copper material and welded construction. Our clients were delighted with this Custom Copper Range Hood Wonderland and we were as delighted to work with them on this project.aiw-6-300 Order # 0067 See all range hoods Custom orders contact us

img_2364-223img_2352-223Hand Hammered Copper Range Hoods -The River has a uniqueness using copper to create the hood with copper banding around the wooden stack. Pair the beauty of wood to the warmth of copper to create your own design. Jim works with each client to insure all their desires are met. Make your dreams a reality with Mountain Copper Creations. We would be happy to create your special look! Hand Hammered Copper Range Hoods by Montana artist Jim Clapham

The River Copper Range Hood– Order # 0052– Custom order

Contact us on our email form or phone 406 880 9411

See more copper range hoods.

 

Trout Meadows Hand Hammered Copper Range Hood

Trout Meadows Hand Hammered Copper Range Hood This handmade custom copper range hood is functional artwork at its best. Custom Crafted with hand hammered copper hood body and needle hammered inlay on the crown and base of the hood. Simple lines create a look that will work well in may decors, rustic to contemporary. Make a statement in home with custom copper artistry by   Mountain Copper Creations

013-225 010-225
Trout Meadows—Order #0053 —custom order

Contact for order information

See All Copper Range Hoods